GTE Fuel OptiMiser Fuel Gas Saver Adds to fuel line better MPG

  • GTE FS is Easy to install on any car – Gas or Diesel
  • Installs on the fuel line – Must go under the car or locate fuel line under the engine bay. This item is not plug and play, because you need to install it on a fuel line feeding your engine.
  • Increase gas mileage up to 24% results can vary
  • We offer 30 day Money Back Guarantee. Please no negative feedback if you end up not installing or want a refund. We support our customers fully. Please contact us if any trouble.
  • Installation: 1. First locate your fuel supply line that feeds the engine from the fuel tank. Most vehicles will have two lines running next to each other. There will be a supply line and a return line. Carefully, while the engine is turned on, in PARK, touch the fuel line and find the colder one. The colder fuel line is your fuel supply line. If it’s very cold outside, your going have to install the product in a warmer garage. Otherwise, you can do a visual check determine which is your supply line. 2. Position the two parts of the fuel saver on opposite ends onto your fuel line. Use the built in screws to tighten. Because of the cleaning and removal process of carbon deposits in your cylinders, the fuel consumption may increase during the beginning cleaning cycle. Your vehicles mileage will stabilize after a short period. You will see noticeable improvements after 3 full gas tanks or about 1000 miles. It is highly recommended that you insure your air filter is clean. If possible adding fuel cleaners to your gas tank will make the cleaning of your engine go faster. Improved performance and a smoother running engine will usually be noticed.

How to Install GTE in  a car :

Installation: 1. First locate your fuel supply line that feeds the engine from the fuel tank. Most vehicles will have two lines running next to each other. There will be a supply line and a return line. Carefully, while the engine is turned on, in PARK, touch the fuel line and find the colder one. The colder fuel line is your fuel supply line. If it’s very cold outside, your going have to install the product in a warmer garage. Otherwise, you can do a visual check determine which is your supply line. 2. Position the two parts of the fuel saver on opposite ends onto your fuel line. Use the built in screws to tighten. Because of the cleaning and removal process of carbon deposits in your cylinders, the fuel consumption may increase during the beginning cleaning cycle. Your vehicles mileage will stabilize after a short period. You will see noticeable improvements after 3 full gas tanks or about 1000 miles. It is highly recommended that you insure your air filter is clean. If possible adding fuel cleaners to your gas tank will make the cleaning of your engine go faster. Improved performance and a smoother running engine will usually be noticed.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s